MSVT Multi-Secondary Voltage Separating Transformer

MSVT Multi-Secondary Voltage Separating Transformer

  • Typical accuracy ±0.1%
  • Easy mounting
  • High output power
  • Integration with the ASTeL test system

The MSVT multi-secondary voltage separating transformer was designed for the galvanic separation of measuring circuits. Thanks to its unique winding technology, exceptional parameters are possible. A maximum ratio accuracy of less than ±0.1 % makes the instrument the ideal solution for a wide range of applications. Among them is the opportunity to use the MSVT transformer for testing electricity meters with closed I-P links, i.e., meters with connected current and potential circuits.

Designed for single-phase meter testing, the MSVT can be controlled either with a local switch or by the test bench control software. Software control, makes it possible to switch the test voltage on/off either from the voltage source and/or from the MSVT. It is also possible to bypass MSVT during testing.

Operating Range
Nominal voltage230V or other on demand
Ratio1:1
Nominal frequency50 or 60 Hz
Number of secondaries10, 20, 40, 60 or other on demand any up to 80
Output power20 VA / secondary
Accuracy
Ratio error< ±0.1%
Angle error< ±2 minutes
Maximum variation between any two secondary windings when equally loaded at the rated burden±0.03% ratio error and ±1 minute angle error
Safety
Maximum test voltage between primary and secondaries2.5kV
Maximum test voltage between secondary windings500V
Physical characteristics
CaseLight aluminum profiles and steel covers
ConnectionScrew connector blocks
Product card
English English PDF
Contact